Aluminum and Steel Siding
Aluminum and steel siding for Ottawa homes, with fasteners placed so the metal can expand and contract through the seasons.
Ontario contractor price pages, 2025 to 2026, aluminum installed. Steel: too few published Ontario prices for a range. Not a quote.
Find a Siding ContractorAbout Aluminum and Steel Siding
Metal siding comes as aluminum strips, steel lap profiles and steel panels. Ontario's 2024 Building Code sets the minimums: steel cladding at least 0.33 mm thick and conforming to CSSBI 23M; aluminum strip siding to CAN/CGSB-93.2-M; aluminum sheet at least 0.58 mm, or 0.46 mm when backed (9.27.11.1.).
The Code says fasteners for metal cladding must be positioned to permit expansion and contraction (9.27.5.6.(1)). Metal cladding nails are at least 38 mm long, spaced up to 600 mm when nailed to framing or 400 mm when nailed to sheathing only (Table 9.27.5.4.-A). Sheet metal siding can serve as face-sealed cladding without a sheathing membrane only where the joints between sheets are of the locked-seam type (9.27.3.6.).
Metal is also one of the cladding types that can work on a wall very close to the lot line: where the limiting distance is under 0.6 m, the Building Code requires a 45-minute fire-resistance rating and metal or noncombustible cladding, or vinyl that meets a narrow set of conditions (9.10.15.5.). On a tight infill lot, ask the City's building official before you choose.
Published Ontario contractor pages put aluminum siding at about $7 to $18 per square foot of wall, installed (2025 to 2026). Steel has too few published Ontario prices for a range. Ask whether trim, removal and disposal are in the quote.
What This Work Covers
- Aluminum to CAN/CGSB-93.2-M, steel to CSSBI 23M
- Fasteners placed for expansion and contraction
- Locked-seam panels where used as face-sealed cladding
- Metal trim and corners
- Options for walls close to the lot line
Popular For
What this work costs
Common questions about aluminum and steel siding
- Steel siding fasteners on an Ottawa house, why slotted holes?
- Aluminum siding installation in Gloucester, what price range?
- Steel siding on a tight Hintonburg infill side wall?
- Should I replace old aluminum siding on my Alta Vista bungalow?
- Locked-seam metal panels without house wrap, allowed in Ontario?
- Getting written siding quotes from three Stittsville companies, what to compare?
- My house is close to the lot line in Hintonburg, what siding is allowed?
- Who handles old siding waste after an Ottawa re-side?
Other Siding Services
Full Re-Siding
Old siding off, the wall checked and re-wrapped, new siding on: a whole-house re-side for an Ottawa home, quoted in writing.
Vinyl Siding
Vinyl and insulated vinyl siding for Ottawa homes, installed to the Building Code fastening rules and the expansion gaps vinyl needs.
Fibre Cement Siding
Fibre cement lap siding and panels for Ottawa homes: a heavier, paintable siding installed to the manufacturer's instructions and the Building Code wall rules.
Engineered Wood Siding
Engineered wood (hardboard and OSB) lap siding and panels for Ottawa homes, with the gaps, clearances and edge sealing the Building Code asks for.
Cedar and Board-and-Batten
Cedar, lumber siding and board-and-batten for Ottawa homes, built to the Building Code sizes, overlaps and ground clearance for real wood.
Siding Repair
Cracked, loose, dented or water-stained siding repaired on Ottawa homes, with the membrane and flashing behind it checked, not just the panel.
Re-Siding with Exterior Insulation
Adding rigid insulation to the outside of the wall while the old siding is off, with the vapour, lot-line and rebate questions answered first.
Ready to Get Started?
Tell us about your aluminum and steel siding job and we'll send it to local siding contractors in Ottawa. They reply by email.