Engineered Wood Siding
Engineered wood (hardboard and OSB) lap siding and panels for Ottawa homes, with the gaps, clearances and edge sealing the Building Code asks for.
Ontario contractor price pages, 2025 to 2026, engineered wood installed. Not a quote.
Find a Siding ContractorAbout Engineered Wood Siding
Ontario's 2024 Building Code covers engineered wood siding under two names, hardboard cladding and OSB cladding, and names both among its examples of moisture-sensitive cladding.
Hardboard siding must conform to ANSI A135.6, "Engineered Wood Siding" (9.27.9.1.). It needs to be at least 9.5 mm thick where supports are no more than 400 mm apart or the wall is sheathed, and 11.1 mm where supports are up to 600 mm apart (9.27.9.2.). Lapped strips need a gap of at least 5 mm at butted ends (9.27.9.4.), and at least 3 mm of clearance to door and window frames (9.27.9.5.). OSB cladding must conform to CSA O437.0, with panel edges supported and treated with a primer or sealer (9.27.10.).
The Code asks for at least 200 mm above finished ground, and 50 mm above a roof surface, for cladding adversely affected by moisture, and it names OSB and hardboard as examples (9.27.2.4.). Ask the manufacturer and the City whether your product counts. Ask how the installer will keep that clearance where a deck, step or garden bed meets the wall.
Published Ontario contractor pages put engineered wood at about $9 to $23 per square foot of wall, installed (2025 to 2026). Ask whether the boards come pre-finished, who seals the cut ends, and whether the price includes removal of the old siding.
What This Work Covers
- Hardboard to ANSI A135.6 or OSB to CSA O437.0
- 5 mm gaps at butted ends, 3 mm at frames
- Ground clearance checked against 9.27.2.4. for your product
- Cut ends and edges sealed
- Pre-finished or site-finished, named in the quote
Popular For
What this work costs
Common questions about engineered wood siding
- How is engineered wood siding different from fibre cement in Ontario?
- Engineered wood siding installed in Riverside South, price per square foot?
- Engineered wood siding next to a deck in Riverside South, clearance?
- Engineered wood siding touching soil in Nepean, what does the Code require?
- What does board-and-batten siding involve on an Ottawa house?
- Board-and-batten siding for a farmhouse look in Manotick, cost?
- Cedar siding prices for a semi in the Glebe?
Other Siding Services
Full Re-Siding
Old siding off, the wall checked and re-wrapped, new siding on: a whole-house re-side for an Ottawa home, quoted in writing.
Vinyl Siding
Vinyl and insulated vinyl siding for Ottawa homes, installed to the Building Code fastening rules and the expansion gaps vinyl needs.
Fibre Cement Siding
Fibre cement lap siding and panels for Ottawa homes: a heavier, paintable siding installed to the manufacturer's instructions and the Building Code wall rules.
Cedar and Board-and-Batten
Cedar, lumber siding and board-and-batten for Ottawa homes, built to the Building Code sizes, overlaps and ground clearance for real wood.
Aluminum and Steel Siding
Aluminum and steel siding for Ottawa homes, with fasteners placed so the metal can expand and contract through the seasons.
Siding Repair
Cracked, loose, dented or water-stained siding repaired on Ottawa homes, with the membrane and flashing behind it checked, not just the panel.
Re-Siding with Exterior Insulation
Adding rigid insulation to the outside of the wall while the old siding is off, with the vapour, lot-line and rebate questions answered first.
Ready to Get Started?
Tell us about your engineered wood siding job and we'll send it to local siding contractors in Ottawa. They reply by email.