Full Re-Siding
Old siding off, the wall checked and re-wrapped, new siding on: a whole-house re-side for an Ottawa home, quoted in writing.
From $10,000 for a typical house in vinyl, whole job Depends on the size of the house, the material and what is found once the old siding is off
- Old siding removed and the sheathing looked at before anything is covered
- Sheathing membrane lapped at least 100 mm, upper over lower
- Flashing at horizontal joints, offsets and over openings
Learn More Vinyl Siding
Vinyl and insulated vinyl siding for Ottawa homes, installed to the Building Code fastening rules and the expansion gaps vinyl needs.
From $5 per sq ft of wall, installed Depends on the wall area and how much trim and how many openings the house has
- ASTM D3679 vinyl or ASTM D7793 insulated vinyl
- 38 mm nails, centred in the nail-hem slots
- Expansion gaps at openings, wider in cold weather
Learn More Fibre Cement Siding
Fibre cement lap siding and panels for Ottawa homes: a heavier, paintable siding installed to the manufacturer's instructions and the Building Code wall rules.
From $10 per sq ft of wall, installed Depends on the wall area, the profile and whether the boards are factory-finished or painted on site
- Lap siding, panels or shingle profiles
- Installed to the manufacturer's written instructions
- Sheathing membrane and flashing per the Building Code
Learn More Engineered Wood Siding
Engineered wood (hardboard and OSB) lap siding and panels for Ottawa homes, with the gaps, clearances and edge sealing the Building Code asks for.
From $9 per sq ft of wall, installed Depends on the wall area, the profile and the finishing
- Hardboard to ANSI A135.6 or OSB to CSA O437.0
- 5 mm gaps at butted ends, 3 mm at frames
- Ground clearance checked against 9.27.2.4. for your product
Learn More Cedar and Board-and-Batten
Cedar, lumber siding and board-and-batten for Ottawa homes, built to the Building Code sizes, overlaps and ground clearance for real wood.
From $10 per sq ft of wall, installed Depends on the wall area, the pattern and whether finishing is part of the job
- Cedar bevel, lap and drop siding
- Board-and-batten with at least 12 mm batten overlap
- Cedar shingles to CSA O118.1 or O118.2
Learn More Aluminum and Steel Siding
Aluminum and steel siding for Ottawa homes, with fasteners placed so the metal can expand and contract through the seasons.
From $7 per sq ft of wall, installed Depends on the wall area, the profile and the trim
- Aluminum to CAN/CGSB-93.2-M, steel to CSSBI 23M
- Fasteners placed for expansion and contraction
- Locked-seam panels where used as face-sealed cladding
Learn More Siding Repair
Cracked, loose, dented or water-stained siding repaired on Ottawa homes, with the membrane and flashing behind it checked, not just the panel.
Quote only A small repair can be one visit; damage found behind the siding can add to it
- Cracked, loose or dented panels and boards
- Membrane and flashing behind the repair
- Sealant at windows and doors
Learn More Re-Siding with Exterior Insulation
Adding rigid insulation to the outside of the wall while the old siding is off, with the vapour, lot-line and rebate questions answered first.
Quote only Depends on the wall area, the insulation chosen and the rebate program steps
- Rigid insulation added while the wall is open
- Vapour placement designed to Building Code 9.25.5.
- Lot-line distance considered before adding thickness
Learn More