Fibre Cement Siding
Fibre cement lap siding and panels for Ottawa homes: a heavier, paintable siding installed to the manufacturer's instructions and the Building Code wall rules.
Ontario contractor price pages, 2025 to 2026, fibre cement installed. Not a quote.
Find a Siding ContractorAbout Fibre Cement Siding
Fibre cement is named in the scope of Ontario's 2024 Building Code cladding rules (9.27.1.1.), but the Code has no subsection of its own for it: no fibre cement material standard and no thickness rule. Its installation comes from the general cladding articles plus the manufacturer's written instructions, so ask your installer which instructions they follow and whether the warranty depends on them.
The general rules still apply: two planes of protection on house walls (9.27.2.2.(4)), a sheathing membrane beneath the siding with joints lapped at least 100 mm (9.27.3.3.), flashing at horizontal joints and over openings (9.27.3.8.), and corrosion-resistant fasteners compatible with the cladding (9.27.5.5.). Fibre cement sheets can serve as face-sealed cladding without a membrane behind them only when every edge is on framing and the joints are sealed and battened or shiplapped (9.27.3.6.); the Code's own notes say face-sealed walls need more regular maintenance.
Published Ontario contractor pages put fibre cement at about $10 to $25 per square foot of wall, installed (2025 to 2026). A whole-house job quotes higher than vinyl on the same pages. Ask whether trim, painting at the factory or on site, and removal of the old siding are included.
What This Work Covers
- Lap siding, panels or shingle profiles
- Installed to the manufacturer's written instructions
- Sheathing membrane and flashing per the Building Code
- Corrosion-resistant fasteners
- Trim and corner details named in the quote
Popular For
What this work costs
Common questions about fibre cement siding
- Is fibre cement panel siding face-sealed under Ontario's Code?
- Price gap between fibre cement and vinyl on an Ottawa house?
- What does the Ontario Building Code say about fibre cement siding?
- What does board-and-batten siding involve on an Ottawa house?
- How is engineered wood siding different from fibre cement in Ontario?
- An Orleans quote of $25 a square foot for fibre cement, fair or high?
- Board-and-batten siding for a farmhouse look in Manotick, cost?
- Cedar shingles in the gable of a Glebe house, exposure limits?
Other Siding Services
Full Re-Siding
Old siding off, the wall checked and re-wrapped, new siding on: a whole-house re-side for an Ottawa home, quoted in writing.
Vinyl Siding
Vinyl and insulated vinyl siding for Ottawa homes, installed to the Building Code fastening rules and the expansion gaps vinyl needs.
Engineered Wood Siding
Engineered wood (hardboard and OSB) lap siding and panels for Ottawa homes, with the gaps, clearances and edge sealing the Building Code asks for.
Cedar and Board-and-Batten
Cedar, lumber siding and board-and-batten for Ottawa homes, built to the Building Code sizes, overlaps and ground clearance for real wood.
Aluminum and Steel Siding
Aluminum and steel siding for Ottawa homes, with fasteners placed so the metal can expand and contract through the seasons.
Siding Repair
Cracked, loose, dented or water-stained siding repaired on Ottawa homes, with the membrane and flashing behind it checked, not just the panel.
Re-Siding with Exterior Insulation
Adding rigid insulation to the outside of the wall while the old siding is off, with the vapour, lot-line and rebate questions answered first.
Ready to Get Started?
Tell us about your fibre cement siding job and we'll send it to local siding contractors in Ottawa. They reply by email.