Free Siding Contractor Matching Vinyl, Fibre Cement, Wood & Metal Siding Across Ottawa
Find a Siding Contractor
Re-Siding a House | 0 views |

Cedar shingles in the gable of a Glebe house, exposure limits?

Question

Cedar shingles in the gable of a Glebe house, exposure limits?

Answer from Siding IQ

Cedar shingles on a gable are governed by the 2024 Ontario Building Code (Div. B, 9.27.7.), and the exposure limit for a 400 mm shingle is 190 mm on single coursing and 305 mm on double coursing. For other shingle lengths, ask the contractor to show you the relevant row in Table 9.27.7.6.

The shingles must conform to CSA O118.1 for western red cedar or CSA O118.2 for eastern white cedar, and each shingle must be between 65 mm and 350 mm wide. Fasteners go 19 mm into framing (9.27.5.7.) and must be corrosion-resistant and compatible with cedar (9.27.5.5.). Shingles and shakes may be fastened to sheathing alone only if it is at least 14.3 mm lumber, 7.5 mm plywood or 7.5 mm OSB (9.27.5.1.); otherwise they are fastened to framing, furring or blocking.

Behind the shingles, the Code requires at least one layer of sheathing membrane conforming to CAN/CGSB-51.32-M, with joints lapped not less than 100 mm and upper sheets overlapping lower sheets (9.27.3.2., 9.27.3.3.). The Code's explanatory notes to 9.27.3.1. say that a drained space at least 10 mm deep is recommended for walls other than masonry, and that shingle cladding installed with discontinuous drained spaces has shown acceptable performance in most conditions; those notes are explanatory, not a requirement. Flashing is required at every horizontal junction between cladding elements and at every horizontal offset, with the flashing extending not less than 50 mm up behind the membrane and sloping not less than 6% to the exterior (9.27.3.7., 9.27.3.8.). Sealant goes between the shingles and any adjacent window or door frame or trim (9.27.4.).

If the house is designated, or sits in a Heritage Conservation District, the Ontario Heritage Act requires City approval before work that affects its heritage attributes begins. Changing the cladding on a gable could affect heritage attributes; talk to the City's heritage staff before choosing a material or signing anything.

Ask the contractor what their process is if something unexpected is found behind the existing gable cladding.

Comparing quotes for the gable, check that each one spells out the same things: what removal and disposal of the old shingles covers, whether new membrane and flashing are included, how trim and corners at the gable edges are handled, and what the contractor will do, and charge, if damage turns up in the sheathing or framing once the old layer comes off.

Ottawa Siding Contractors

Want this done at your place?

Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa siding contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local siding contractors in Ottawa. Free matching, no obligation.

Find a Siding Contractor