Can vinyl siding be nailed to the sheathing alone in Ontario?
Can vinyl siding be nailed to the sheathing alone in Ontario?
Only vertically applied vinyl, and only on thick enough sheathing, under the 2024 Ontario Building Code (Div. B, 9.27.5.1.).
The general rule is that siding is fastened to framing, furring or blocking (9.27.5.1.(1)). Vertically applied vinyl, insulated vinyl and polypropylene siding may be fastened to the sheathing alone only if the sheathing is at least 14.3 mm lumber, 12.5 mm plywood or 12.5 mm OSB (9.27.5.1.(2)). Horizontally applied vinyl is not on that list, so it goes to framing, furring or blocking.
The Code also sets the nail size and spacing. For horizontally applied vinyl, the fasteners are at least 38 mm long and spaced not more than 400 mm apart. For vertically applied vinyl, the spacing tightens to not more than 300 mm. The fasteners must be corrosion-resistant and compatible with the cladding (9.27.5.5.), and each one goes in the centre of the slots of the nail hem (9.27.5.6.). The vinyl siding industry's installation notes add about 1/32 inch (0.8 mm) between the fastener head and the panel.
Penetration depth matters too. The Code (9.27.5.7.) says vinyl fasteners must pass through the nail-holding base or reach at least 32 mm into the framing. Where the sheathing is not suitable for fastening, the fastener length has to increase to make up the difference, as the Code's explanatory notes confirm.
One more layer sits between the sheathing and the siding. The 2024 Ontario Building Code (9.27.3.2., 9.27.3.3.) requires at least one layer of sheathing membrane conforming to CAN/CGSB-51.32-M, with horizontal joints lapped at least 100 mm and upper sheets overlapping lower sheets. That membrane is the second plane of protection the Code requires for all exterior walls enclosing residential space (9.27.2.2.(4)). Flashing is also required at horizontal junctions between cladding elements, and over a wall opening where the vertical distance from the bottom of the eave to the top of the trim is more than one-quarter of the eave's horizontal overhang (9.27.3.8.).
Before a contractor arrives, walk around the house from the ground and note a few things: any panels that look bowed, buckled or have gaps at the seams; any staining or soft spots on interior walls directly below windows; any places where the bottom edge of the siding sits close to the soil or a roof surface; and the approximate age of the house; ask the contractor to confirm the sheathing type and thickness once the old siding is off.
Related service: Vinyl Siding What it costs: Vinyl siding
Want this done at your place?
Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local siding contractors in Ottawa. Free matching, no obligation.