Free Siding Contractor Matching Vinyl, Fibre Cement, Wood & Metal Siding Across Ottawa
Find a Siding Contractor
Vinyl & Insulated Vinyl | 0 views |

What standard does vinyl siding have to meet in Ontario?

Question

What standard does vinyl siding have to meet in Ontario?

Answer from Siding IQ

Vinyl siding installed in Ontario must conform to ASTM D3679 under the 2024 Ontario Building Code (Div. B, 9.27.12.1.). Insulated vinyl siding has its own standard: ASTM D7793. Where a flame-spread rating is required, the product must also be tested under CAN/ULC-S102.2.

Those are the material standards. The Code also sets out how vinyl is fastened and handled during installation. Fasteners must be corrosion-resistant, at least 38 mm long, and placed in the centre of the slots of the nail hem (2024 Ontario Building Code, 9.27.5.6., Table 9.27.5.4.-A). For horizontally applied vinyl, fasteners go no more than 400 mm apart; for vertically applied, no more than 300 mm apart. The fastener must penetrate through the nail-holding base or at least 32 mm into framing (9.27.5.7.). Horizontal vinyl is fastened to framing, furring or blocking; it cannot be fastened to sheathing alone.

The vinyl siding industry's installation notes add a few handling details the Code does not cover: leave at least 6.4 mm clearance at openings and stops for expansion, increased to 9.5 mm when installing below 4.4 degrees Celsius; leave about 0.8 mm between the fastener head and the panel face; do not face-nail or staple through the panel face.

Behind the vinyl, the 2024 Ontario Building Code (9.27.2.2.(4)) requires two planes of protection: the siding itself as the first plane, and a sheathing membrane (house wrap conforming to CAN/CGSB-51.32-M) as the second, with joints lapped at least 100 mm and upper sheets overlapping lower sheets (9.27.3.3.). The Code's explanatory notes recommend a drained space at least 10 mm deep behind the cladding as best practice, though no Ontario clause makes that gap a requirement. Flashing is required at horizontal junctions between cladding elements, and over openings where 9.27.3.8.(3) requires it.

If the wall is close to the lot line, the choice of cladding can be restricted under 9.10.15.5. of the 2024 Ontario Building Code; ask the City's building official before choosing.

When you get quotes, ask what the contractor will charge if damaged or missing sheathing, blocking or framing is found once the old siding comes off.

Ottawa Siding Contractors

Want this done at your place?

Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa siding contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local siding contractors in Ottawa. Free matching, no obligation.

Find a Siding Contractor