Vinyl Siding
Vinyl and insulated vinyl siding for Ottawa homes, installed to the Building Code fastening rules and the expansion gaps vinyl needs.
Ontario contractor price pages, 2025 to 2026, vinyl installed. Not a quote. Insulated vinyl has too few published prices for a range.
Find a Siding ContractorAbout Vinyl Siding
Vinyl siding moves with temperature, so how it is fastened matters as much as the panel. Ontario's 2024 Building Code sets the rules: vinyl siding must conform to ASTM D3679, and insulated vinyl to ASTM D7793 (9.27.12.1.). Horizontally applied vinyl is fastened with nails at least 38 mm long spaced no more than 400 mm apart (Table 9.27.5.4.-A), driven in the centre of the slots of the nail hem (9.27.5.6.(2)) and reaching at least 32 mm into the framing (9.27.5.7.).
The vinyl siding industry's installation notes add the details the Code leaves to the manufacturer: leave at least 1/4 inch (6.4 mm) at openings and stops for expansion, and 3/8 inch (9.5 mm) when installing below 40°F (4.4°C); leave about 1/32 inch between the nail head and the panel; never face-nail. Those are industry instructions, not Code clauses; ask your installer to follow them on a cold-weather job.
Insulated vinyl has foam bonded to the back of the panel. Natural Resources Canada describes its added insulation value as R-2 to 4 and calls that "not high"; if the goal is a warmer house, ask about insulation behind the siding instead.
Published Ontario contractor pages put vinyl at about $5 to $14 per square foot of wall, installed (2025 to 2026). Ask what is included: removal of the old siding, house wrap, trim, and corners.
What This Work Covers
- ASTM D3679 vinyl or ASTM D7793 insulated vinyl
- 38 mm nails, centred in the nail-hem slots
- Expansion gaps at openings, wider in cold weather
- J-channel, corners and starter strip
- Sealant at window and door frames
Popular For
What this work costs
Common questions about vinyl siding
- What standard does vinyl siding have to meet in Ontario?
- How much does vinyl siding cost per square foot in Kanata?
- Price gap between fibre cement and vinyl on an Ottawa house?
- Should I replace old aluminum siding on my Alta Vista bungalow?
- Can vinyl siding be nailed to the sheathing alone in Ontario?
- Is $5 a square foot realistic for vinyl siding in Ottawa?
- Is face-nailing vinyl siding acceptable on an Ontario house?
- Siding repair before selling my Alta Vista house, worth it?
Other Siding Services
Full Re-Siding
Old siding off, the wall checked and re-wrapped, new siding on: a whole-house re-side for an Ottawa home, quoted in writing.
Fibre Cement Siding
Fibre cement lap siding and panels for Ottawa homes: a heavier, paintable siding installed to the manufacturer's instructions and the Building Code wall rules.
Engineered Wood Siding
Engineered wood (hardboard and OSB) lap siding and panels for Ottawa homes, with the gaps, clearances and edge sealing the Building Code asks for.
Cedar and Board-and-Batten
Cedar, lumber siding and board-and-batten for Ottawa homes, built to the Building Code sizes, overlaps and ground clearance for real wood.
Aluminum and Steel Siding
Aluminum and steel siding for Ottawa homes, with fasteners placed so the metal can expand and contract through the seasons.
Siding Repair
Cracked, loose, dented or water-stained siding repaired on Ottawa homes, with the membrane and flashing behind it checked, not just the panel.
Re-Siding with Exterior Insulation
Adding rigid insulation to the outside of the wall while the old siding is off, with the vapour, lot-line and rebate questions answered first.
Ready to Get Started?
Tell us about your vinyl siding job and we'll send it to local siding contractors in Ottawa. They reply by email.