Cedar and Board-and-Batten
Cedar, lumber siding and board-and-batten for Ottawa homes, built to the Building Code sizes, overlaps and ground clearance for real wood.
Ontario contractor price pages, 2025 to 2026, cedar and natural wood installed. Not a quote.
Find a Siding ContractorAbout Cedar and Board-and-Batten
Solid wood siding covers bevel siding, lapped and drop siding, vertical boards with battens, and cedar shingles or shakes. Ontario's 2024 Building Code sets sizes for each.
Lumber siding must be at least 14.3 mm thick and no more than 286 mm wide; bevel siding at least 5 mm thick at the top (9.27.6.2.). Boards overlap at least 1 mm for every 16 mm of width, and vertical battens overlap the boards by at least 12 mm (9.27.6.3.). Cedar shingles and shakes must conform to CSA O118.1 for western red cedar or O118.2 for eastern white cedar (9.27.7.1.), with the maximum exposure set by shingle length and single or double coursing (Table 9.27.7.6.).
Untreated wood is cladding "adversely affected by moisture", so it needs at least 200 mm of clearance above finished ground and 50 mm above a roof (9.27.2.4.). Vertically applied boards can be nailed to sheathing alone only if the sheathing is at least 14.3 mm lumber, 12.5 mm plywood or 12.5 mm OSB; otherwise they go to framing, furring or blocking (9.27.5.1.).
On a heritage house, changing wood siding to another material may affect its heritage attributes. Talk to the City's heritage staff before you choose.
Published Ontario contractor pages put cedar and natural wood at about $10 to $28 per square foot of wall, installed (2025 to 2026). Finishing is separate work; ask whether the quote includes it.
What This Work Covers
- Cedar bevel, lap and drop siding
- Board-and-batten with at least 12 mm batten overlap
- Cedar shingles to CSA O118.1 or O118.2
- 200 mm clearance above finished ground for untreated wood
- Fastening to framing, furring or blocking
Popular For
What this work costs
Common questions about cedar and board-and-batten
- Cedar shingles in the gable of a Glebe house, exposure limits?
- Board-and-batten siding for a farmhouse look in Manotick, cost?
- Cedar siding prices for a semi in the Glebe?
- What does board-and-batten siding involve on an Ottawa house?
- Vertical board-and-batten nailing to studs in Kanata?
- Engineered wood siding next to a deck in Riverside South, clearance?
- Engineered wood siding installed in Riverside South, price per square foot?
Other Siding Services
Full Re-Siding
Old siding off, the wall checked and re-wrapped, new siding on: a whole-house re-side for an Ottawa home, quoted in writing.
Vinyl Siding
Vinyl and insulated vinyl siding for Ottawa homes, installed to the Building Code fastening rules and the expansion gaps vinyl needs.
Fibre Cement Siding
Fibre cement lap siding and panels for Ottawa homes: a heavier, paintable siding installed to the manufacturer's instructions and the Building Code wall rules.
Engineered Wood Siding
Engineered wood (hardboard and OSB) lap siding and panels for Ottawa homes, with the gaps, clearances and edge sealing the Building Code asks for.
Aluminum and Steel Siding
Aluminum and steel siding for Ottawa homes, with fasteners placed so the metal can expand and contract through the seasons.
Siding Repair
Cracked, loose, dented or water-stained siding repaired on Ottawa homes, with the membrane and flashing behind it checked, not just the panel.
Re-Siding with Exterior Insulation
Adding rigid insulation to the outside of the wall while the old siding is off, with the vapour, lot-line and rebate questions answered first.
Ready to Get Started?
Tell us about your cedar and board-and-batten job and we'll send it to local siding contractors in Ottawa. They reply by email.