Board-and-batten siding for a farmhouse look in Manotick, cost?
Board-and-batten siding for a farmhouse look in Manotick, cost?
Board-and-batten in natural wood runs about $10 to $28 per square foot installed, based on published Ontario contractor price pages, 2025 to 2026. Engineered wood (hardboard) is about $9 to $23 per square foot installed and gives a similar profile.
What moves the number around for a Manotick farmhouse: wall area, which material you choose, removal of the existing siding layers, trim and corner details, what the contractor finds behind the old cladding, access and height, and disposal.
The 2024 Ontario Building Code has specific rules for board-and-batten. The boards are lumber siding and must be at least 14.3 mm thick (9.27.6.2.). The battens overlap the boards by at least 12 mm (9.27.6.3.). Fasteners go into framing, furring or blocking (9.27.5.1.(1)); vertical lumber siding may be fastened to the sheathing alone only where the sheathing is at least 14.3 mm lumber, 12.5 mm plywood or 12.5 mm OSB (9.27.5.1.(2)). Nails are at least 51 mm, spaced not more than 600 mm (Table 9.27.5.4.-A), corrosion-resistant and compatible with the cladding (9.27.5.5.). The Code also requires at least one layer of sheathing membrane conforming to CAN/CGSB-51.32-M behind the cladding, with horizontal joints lapped at least 100 mm and upper sheets overlapping lower sheets (9.27.3.2., 9.27.3.3.). The wall assembly needs a first plane of protection (the cladding itself) and a second plane that intercepts any rain or snow that gets past it and drains it to the exterior (9.27.2.2.(4), 9.27.2.3.). Flashing is required at every horizontal junction between cladding elements and at every horizontal offset, unless the upper cladding overlaps the lower by at least 25 mm (9.27.3.7., 9.27.3.8.). Sealant goes between the siding and any door or window frames (9.27.4.).
The Code sets a clearance of at least 200 mm between finished ground and cladding adversely affected by moisture, and names untreated wood as an example (9.27.2.4.). Ask the contractor how the bottom course will be detailed and whether the product they are specifying falls under that rule.
The Code's explanatory notes recommend a drained space at least 10 mm deep behind the cladding for walls other than masonry. That is a recommendation in the notes, not a Code requirement, but it is worth raising with the contractor.
A complete quote for this job should address:
- removal of existing siding and disposal (ask what the quote includes for disposal)
- new sheathing membrane and any sheathing repairs
- flashing at openings, offsets and horizontal junctions
- all trim, corners and window and door surrounds
- the ground clearance detail at the base
- what happens to the price if damage is found behind the old siding
- the manufacturer's written installation instructions and warranty
Related service: Cedar and Board-and-Batten What it costs: Cedar and board-and-batten
Want this done at your place?
Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local siding contractors in Ottawa. Free matching, no obligation.