Free Siding Contractor Matching Vinyl, Fibre Cement, Wood & Metal Siding Across Ottawa
Find a Siding Contractor
Aluminum & Steel Siding | 0 views |

Steel siding fasteners on an Ottawa house, why slotted holes?

Question

Steel siding fasteners on an Ottawa house, why slotted holes?

Answer from Siding IQ

Fasteners for metal cladding must, under the 2024 Ontario Building Code, be positioned to permit expansion and contraction (Div. B, 9.27.5.6.(1)); slotted fastening holes are how a panel allows for that.

Ask the installer how the fasteners will be placed to allow that movement, following the manufacturer's written instructions. The Code also requires fasteners that are corrosion-resistant and compatible with the cladding (9.27.5.5.).

On steel specifically, the Code sets a minimum thickness of 0.33 mm for steel cladding and requires it to conform to CSSBI 23M (9.27.11.1.). The fastener spacing the Code gives for metal cladding is 600 mm when nailed into framing, or 400 mm when nailed into sheathing only (Table 9.27.5.4.-A), and the minimum nail length is 38 mm (same table). Penetration into framing must be at least 25 mm for metal cladding (9.27.5.7.).

A few things worth confirming with the contractor on a steel siding job:

  • How the fasteners are placed to allow for expansion and contraction.
  • That the fasteners are corrosion-resistant and compatible with the steel (9.27.5.5.).
  • That the second plane of protection, the sheathing membrane conforming to CAN/CGSB-51.32-M, is installed beneath the steel with joints lapped at least 100 mm and upper sheets overlapping lower sheets (9.27.3.2., 9.27.3.3.).
  • That flashing is in place at every horizontal junction between cladding elements and over any wall openings where the geometry requires it (9.27.3.7., 9.27.3.8.).
When the job is finished, keep the written contract, the itemized quote, the manufacturer's warranty card or document, and photos taken of the wall before the new steel went on: those photos show what was behind the siding before it was covered.
Ottawa Siding Contractors

Want this done at your place?

Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa siding contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local siding contractors in Ottawa. Free matching, no obligation.

Find a Siding Contractor