Steel siding on a tight Hintonburg infill side wall?
Steel siding on a tight Hintonburg infill side wall?
Steel siding can be used on a tight infill side wall. Steel has too few published Ontario prices to quote a range (aluminum is about $7 to $18 per square foot on 2025 to 2026 contractor price pages), so ask each contractor to break out the material cost in writing.
The side wall being close to the lot line changes the answer. Under the 2024 Ontario Building Code (Div. B, 9.10.15.5.), a wall with a limiting distance of less than 1.2 metres from the property line needs a fire-resistance rating of at least 45 minutes. At less than 0.6 metres, the Code also requires either metal or noncombustible cladding, or a tested assembly. Steel is a metal cladding, so it can satisfy that second condition, but the wall assembly behind it still needs to meet the 45-minute rating, and that is a design question, not something to assume. Before you choose any material, ask the City's Building Code Services what limiting distance applies to that wall and which assembly meets the Code there.
The Code (9.27.11.1.) sets a minimum steel thickness of 0.33 mm and requires the product to conform to CSSBI 23M. Fasteners must be corrosion-resistant and positioned to allow expansion and contraction (9.27.5.6.). A sheathing membrane conforming to CAN/CGSB-51.32-M goes behind the siding with joints lapped at least 100 mm and upper sheets overlapping lower sheets (9.27.3.2., 9.27.3.3.). Flashing is required at every horizontal junction and offset, and at changes of substrate (9.27.3.7., 9.27.3.8.). On a narrow infill side wall, access for staging and the number of penetrations, trim pieces and corners all affect the final number.
A few things worth confirming in writing before any quote is signed:
- whether removal of the existing cladding and membrane is included, and what happens to the cost if damaged sheathing is found behind it
- how disposal is handled, and whether old metal siding is separated for scrap (the City of Ottawa's Trail Waste Facility takes source-separated scrap metal at no charge, though whether old siding qualifies is worth confirming with the City)
- the flashing and trim details at the lot-line end of the wall, where access may be limited
- a WSIB clearance for the contractor, and whether the crew's Working at Heights training is current
Related service: Aluminum and Steel Siding What it costs: Aluminum and steel siding
Want this done at your place?
Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local siding contractors in Ottawa. Free matching, no obligation.