Free Siding Contractor Matching Vinyl, Fibre Cement, Wood & Metal Siding Across Ottawa
Find a Siding Contractor
Cedar & Board-and-Batten | 0 views |

Can wood siding go on a wall near my neighbour in Hintonburg?

Question

Can wood siding go on a wall near my neighbour in Hintonburg?

Answer from Siding IQ

Whether wood siding can go on a wall close to your neighbour depends on how far that wall sits from the property line, and the 2024 Ontario Building Code (Div. B, 9.10.15.5.) sets out the rules.

What the Code says about walls near the lot line

The Code measures a "limiting distance" from the wall face to the property line. At 1.2 metres or more, the cladding choice is not restricted by the lot-line rule. From 0.6 metres to less than 1.2 metres, the exposing building face needs a fire-resistance rating of not less than 45 minutes; that clause does not restrict the cladding type. Under 0.6 metres, the wall needs that same 45-minute rating and the cladding must be either metal or noncombustible, or vinyl siding meeting 9.27.12. installed without furring over at least 12.7 mm gypsum sheathing with a flame-spread rating not more than 25 and no more than 2 mm thick, or a tested assembly.

So the answer depends on the measured distance: ask the City's building official which cladding your wall allows before choosing wood.

Your limiting distance is measured by a designer or the City's building official, not estimated by eye. Before choosing a material, ask the City's Building Code Services what limiting distance applies to your wall.

A few other things matter for this wall regardless of the lot-line distance. The 2024 Ontario Building Code (9.27.2.2.(4)) requires two planes of protection on any exterior wall enclosing residential space: the cladding itself as the first plane, and a drainage plane behind it as the second. For wood siding, that second plane is a sheathing membrane conforming to CAN/CGSB-51.32-M (9.27.3.2.), lapped at least 100 mm at joints with upper sheets over lower. Wood and similar moisture-sensitive cladding also needs at least 200 mm of clearance between the finished ground and the bottom of the siding (9.27.2.4.). The Code's explanatory notes recommend a drained space at least 10 mm deep behind the cladding, though that is a recommendation in the notes, not a Code requirement.

If the house is designated under the Ontario Heritage Act or sits within a Heritage Conservation District, changing the siding may affect its heritage attributes and needs City approval before work begins.

The City of Ottawa's permit pages do not list siding either way, so ask Building Code Services before starting, particularly for a wall this close to the lot line.

When you speak with a siding contractor, ask them to show you in writing how they plan to meet the lot-line rule for your specific limiting distance before you agree to a material.

Ottawa Siding Contractors

Want this done at your place?

Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa siding contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local siding contractors in Ottawa. Free matching, no obligation.

Find a Siding Contractor