Free Siding Contractor Matching Vinyl, Fibre Cement, Wood & Metal Siding Across Ottawa
Find a Siding Contractor

Aluminum and Steel Siding Cost in Ottawa, Layer by Layer

Aluminum $7 to $18 per sq ft

Aluminum siding installed, on published Ontario contractor price pages, 2025 to 2026. Steel siding had one published Ontario figure, so it gets no range here: ask for it itemized.

Reviewed 2026-09-30 · how we set these ranges

For metal siding, the Code asks that fasteners be positioned so the panels can expand and contract, and it sets separate minimum thicknesses for aluminum and steel. Only aluminum has enough published prices for a range; steel quotes need to be compared line by line.

This job, layer by layer

Outside at the top, the framing at the bottom. Each layer is a line your quote should cover. Tick the ones that are in your job and the request form below will list them for you.

  1. Old siding off, and disposal $1–$3 / sq ft
  2. New aluminum or steel siding Al $7–$18 / sq ft
  3. Flashing, trim and corners ask for it itemized
  4. Sheathing membrane (house wrap) ask for it itemized
  5. Sheathing, only if damaged ask for it itemized
Dashed layers are only in some jobs. A dollar tag means at least two independent published Ontario contractor price pages agree; "ask for it itemized" means they do not.
  1. Old siding off, and disposal

    Published price

    About $1 to $3 per square foot of wall for removal, on published Ontario contractor price pages, 2025 to 2026.

    The Code rules and quote line for this layer, on every siding job

  2. New aluminum or steel siding

    What the rules ask

    • Aluminum strip siding conforms to CAN/CGSB-93.2-M; aluminum sheet is at least 0.58 mm thick, or 0.46 mm when backed. (9.27.11.1.)
    • Steel cladding is at least 0.33 mm thick and conforms to CSSBI 23M. (9.27.11.1.)
    • Fasteners for metal cladding are positioned to permit expansion and contraction. (9.27.5.6.(1))
    • Metal cladding nails at least 38 mm long, at most 600 mm apart into framing or 400 mm into sheathing only, and at least 25 mm into the framing. (Table 9.27.5.4.-A, 9.27.5.7.)

    Published price

    Aluminum: about $7 to $18 per square foot of wall, installed, on published Ontario contractor price pages, 2025 to 2026. Steel: too few published prices to quote a range.

    Quote line to ask for

    Aluminum or steel, the gauge or thickness against the Code minimum, and the profile, by product name.

  3. Flashing, trim and corners

    For this job

    • Minimum flashing thicknesses include 0.33 mm galvanized steel and 0.48 mm aluminum. (9.27.3.7.(1))

    Published price

    Too few published prices to quote this layer on its own: ask for it itemized.

    Quote line to ask for

    Which flashing metal and thickness, and whether the trim, corners and starter pieces are priced in the per-square-foot figure.

    The Code rules and quote line for this layer, on every siding job

  4. Sheathing membrane (house wrap)

    For this job

    • Metal siding in sheets can go without a membrane only where the joints between sheets are the locked-seam type. (9.27.3.6.)

    Published price

    Too few published prices to quote this layer on its own: ask for it itemized.

    The Code rules and quote line for this layer, on every siding job

  5. Sheathing, only if damagedonly in some jobs

    For this job

    • Vertically applied metal siding may be fastened to the sheathing alone only where it is at least 14.3 mm lumber, 7.5 mm plywood or 7.5 mm OSB. (9.27.5.1.(3))

    Published price

    Too few published prices to quote this layer on its own: ask for it itemized.

    The Code rules and quote line for this layer, on every siding job

Every layer is listed. With the tick-boxes, the request form below lists the layers you picked.

Get quotes for this wall

Worth knowing for this job

  • Close to the lot line: where the limiting distance is under 0.6 m, metal or noncombustible cladding is one of the options the Code lists, with a 45-minute rated wall. Ask the City what your wall's limiting distance is.

    9.10.15.5.(2)(a)

Ask before you sign

  • Aluminum or steel, with the thickness written down
  • For steel, the material, labour and trim as separate lines, since there are too few published prices to compare against
  • What happens to the old metal siding
  • The total, the payment schedule and the taxes, in writing

More on this work: Aluminum and Steel Siding

Want this done at your place?

Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa siding contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.
Find a Siding Contractor