Locked-seam metal panels without house wrap, allowed in Ontario?
Locked-seam metal panels without house wrap, allowed in Ontario?
Yes, with a specific condition. The 2024 Ontario Building Code (Div. B, 9.27.3.6.) permits the sheathing membrane to be omitted under metal siding sheets, but only where the joints between sheets are of the locked-seam type.
That is the face-sealed exception. The Code's explanatory notes describe face-sealed assemblies as needing more intensive, regular and ongoing maintenance, and say they are not recommended where the owner may not be aware of that.
The two-plane requirement still applies. The 2024 Ontario Building Code (Div. B, 9.27.2.2.(4)) requires every exterior wall enclosing residential space to have a first plane of protection and a second plane that intercepts rain and snow that get past the first and dissipates it to the exterior (9.27.2.3.). Ask how every seam, penetration and trim junction will be detailed. Sealant is still required between the cladding and adjacent door and window frames or trim, including sills, unless those areas are completely protected from rain (9.27.4.).
Flashing rules do not disappear either. The 2024 Ontario Building Code (Div. B, 9.27.3.7. and 9.27.3.8.) still requires flashing at every horizontal junction between cladding elements, every horizontal offset, and where substrates change, unless the upper cladding overlaps the lower by not less than 25 mm. Over wall openings, flashing is required where the vertical distance from the bottom of the eave to the top of the trim is more than one-quarter of the horizontal overhang of the eave.
For steel panels, the Code sets a minimum thickness of 0.33 mm and requires conformance to CSSBI 23M (9.27.11.1.). Fasteners must be positioned to permit expansion and contraction (9.27.5.6.) and must be corrosion-resistant and compatible with the cladding (9.27.5.5.).
When you have two written quotes in front of you, put these items side by side: what each contractor charges for removing the old siding and where it goes, whether new sheathing membrane is included or explicitly excluded and why, how flashing is handled at every horizontal break and over each opening, what is included for trim, corners and all the edges around windows and doors, and what the price does if damaged sheathing or framing is found once the old cladding comes off.
Related service: Aluminum and Steel Siding What it costs: Aluminum and steel siding
Want this done at your place?
Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local siding contractors in Ottawa. Free matching, no obligation.