Engineered Wood Siding Cost in Ottawa, and What Sits Behind It
$9 to $23 per sq ft of wall
Engineered wood siding installed, on published Ontario contractor price pages, 2025 to 2026.
Reviewed 2026-09-30 · how we set these ranges
The Building Code covers engineered wood under two names: hardboard, and OSB cladding. Each has its own standard, thickness and gap rules, and the Code names both as examples of cladding adversely affected by moisture, which the ground clearance rule covers. The map below shows where each rule lands in the wall.
This job, layer by layer
Outside at the top, the framing at the bottom. Each layer is a line your quote should cover. Tick the ones that are in your job and the request form below will list them for you.
- Old siding off, and disposal $1–$3 / sq ft
- New engineered wood siding $9–$23 / sq ft
- Flashing, trim and corners ask for it itemized
- Sheathing membrane (house wrap) ask for it itemized
- Sheathing, only if damaged ask for it itemized
-
Old siding off, and disposal
Published price
About $1 to $3 per square foot of wall for removal, on published Ontario contractor price pages, 2025 to 2026.
The Code rules and quote line for this layer, on every siding job
-
New engineered wood siding
What the rules ask
- Hardboard cladding conforms to ANSI A135.6, "Engineered Wood Siding", at least 9.5 mm thick on supports up to 400 mm apart or over continuous sheathing, 11.1 mm on supports up to 600 mm. (9.27.9.1., 9.27.9.2.)
- Lapped hardboard strips leave a gap of at least 5 mm at butted ends, and at least 3 mm to door and window frames. (9.27.9.4.(1), 9.27.9.5.(1))
- OSB cladding conforms to CSA O437.0, with panel edges supported and primed or sealed, a 3 mm gap between panels and 3 mm to frames. (9.27.10.)
- A clearance of at least 200 mm above finished ground, and 50 mm above a roof surface, applies to cladding adversely affected by moisture; the Code names hardboard and OSB as examples. Ask the manufacturer whether the product quoted counts. (9.27.2.4.(1), (2))
Published price
About $9 to $23 per square foot of wall, installed, on published Ontario contractor price pages, 2025 to 2026.
Quote line to ask for
The product, its standard (ANSI A135.6 or CSA O437.0) and thickness, and how the bottom course is kept clear of the ground.
-
Flashing, trim and corners
Published price
Too few published prices to quote this layer on its own: ask for it itemized.
The Code rules and quote line for this layer, on every siding job
-
Sheathing membrane (house wrap)
Published price
Too few published prices to quote this layer on its own: ask for it itemized.
The Code rules and quote line for this layer, on every siding job
-
Sheathing, only if damagedonly in some jobs
Published price
Too few published prices to quote this layer on its own: ask for it itemized.
The Code rules and quote line for this layer, on every siding job
Every layer is listed. With the tick-boxes, the request form below lists the layers you picked.
Get quotes for this wallWorth knowing for this job
Where the siding meets a deck, patio or the ground, the clearance is measured from finished ground; ask the contractor and the manufacturer how the bottom edge is detailed at each of those spots.
9.27.2.4.(1)
Ask before you sign
- Hardboard or OSB product, with its standard and thickness
- The ground and roof clearance detail at the bottom of each wall
- Removal, membrane, trim and flashing as separate lines
- The total, the payment schedule and the taxes, in writing
More on this work: Engineered Wood Siding
Siding IQ answers on this job
- Engineered wood siding installed in Riverside South, price per square foot?
- How is engineered wood siding different from fibre cement in Ontario?
- Engineered wood siding next to a deck in Riverside South, clearance?
- Engineered wood siding touching soil in Nepean, what does the Code require?
- How is engineered wood siding different from fibre cement in Ontario?
Want this done at your place?
Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.