Free Siding Contractor Matching Vinyl, Fibre Cement, Wood & Metal Siding Across Ottawa
Find a Siding Contractor
Wrap, Flashing & the Wall Behind | 0 views |

Siding over rigid foam with no house wrap in Ottawa, allowed?

Question

Siding over rigid foam with no house wrap in Ottawa, allowed?

Answer from Siding IQ

The 2024 Ontario Building Code allows siding to go directly over rigid foam without a separate layer of sheathing membrane, but only under specific conditions. Whether those conditions are met on your wall is the first thing to sort out before any work starts.

The general rule is that at least one layer of sheathing membrane conforming to CAN/CGSB-51.32-M is required beneath siding (9.27.3.2.). The exception is in (9.27.3.4.): the membrane is not required where non-wood-based rigid exterior insulating sheathing, or insulating sheathing with an integral membrane, is installed, with joints sealed or lapped and detailed to drain. So the foam must be non-wood-based, its joints must be sealed or lapped, and the assembly must be detailed to drain. If those three things are in place, the membrane layer can be omitted.

There is a second layer of rules that applies whenever low-permeance foam goes on the outside of a wall. Sheet or panel materials with low air leakage and low water vapour permeance trigger (9.25.5.1. and 9.25.5.2.): the foam must either sit on the warm face of the wall, or the ratio of outboard to inboard thermal resistance must meet the table in (9.25.5.2.), or the foam must be outboard of a drained and vented air space at least 10 mm deep behind the cladding. Ottawa's heating degree-days fall between 4,440 and 4,520, which puts it in the under-4,999 band where the table ratio is 0.20. A material with water vapour permeance of at least 30 ng/(Pa·s·m²) and thermal resistance of at least 0.7 (m²·K)/W in a location under 6,000 degree-days is exempt from that rule under (9.25.5.1.(4)). Whether your foam meets those permeance and resistance numbers is a question for the manufacturer's data sheet and a designer, not a guess.

The Code's explanatory notes also say a drained space at least 10 mm deep is recommended behind siding on walls other than masonry; that is a recommendation, not a requirement. Natural Resources Canada notes that strapping allows a drainage plane to be installed. Natural Resources Canada recommends removing the existing siding first so that any work to the structure, cavity insulation, and the vapour and air barrier can be done before adding exterior insulation.

The wall still needs both planes of protection (9.27.2.2.(4)): the cladding as the first plane, and a drainage plane with flashing as the second. Flashing is required at every horizontal junction and offset, and sealant goes between the siding and any window or door frame (9.27.4.).

Ask the City's Building Code Services before starting, particularly because exterior insulation is involved.

After the job is done, keep the written contract, the itemized quote, the manufacturer's warranty for both the foam and the siding, and photos of the wall taken before it was covered.

Ottawa Siding Contractors

Want this done at your place?

Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa siding contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local siding contractors in Ottawa. Free matching, no obligation.

Find a Siding Contractor