Free Siding Contractor Matching Vinyl, Fibre Cement, Wood & Metal Siding Across Ottawa
Find a Siding Contractor
Wrap, Flashing & the Wall Behind | 0 views |

Siding over brick on part of a Nepean wall, what joins them?

Question

Siding over brick on part of a Nepean wall, what joins them?

Answer from Siding IQ

Where two different cladding materials meet on the same wall, the 2024 Ontario Building Code (Div. B, 9.27.4.1.) requires sealant at vertical joints between different cladding materials unless the joint is lapped or flashed. That joint is where the new siding meets the existing brick.

The Code's two-plane rule (9.27.2.2.(4)) also applies to the new siding section: the wall behind it needs a first plane of protection (the siding itself) and a second plane that intercepts any water that gets past and dissipates it to the exterior. That second plane is a sheathing membrane conforming to CAN/CGSB-51.32-M, with joints lapped not less than 100 mm and upper sheets overlapping lower sheets (9.27.3.2., 9.27.3.3.). Ask how the membrane will be detailed where it meets the brick.

Flashing is required at every horizontal junction between cladding elements and where substrates change (9.27.3.7., 9.27.3.8.). Where the new siding sits above or below the brick, or where there is a horizontal offset between them, flashing is required unless the upper cladding overlaps the lower by at least 25 mm. The Code's minimum flashing materials include 0.33 mm galvanized steel, 0.46 mm aluminum and 1.02 mm vinyl, among others. Flashing must extend not less than 50 mm up behind the sheathing membrane, slope not less than 6% to the exterior and have end dams not less than 25 mm high.

The attachment rules also matter here. The new siding is fastened to framing, furring or blocking (9.27.5.1.); how it lines up with the brick face is a design question to ask the contractor about.

A few things worth asking any contractor who quotes this job:

  • How they will detail the membrane where it meets the brick, and what material they will use for the transition.
  • What flashing profile they plan at the horizontal junction, and how they will form the end dams.
  • What fastening they propose and whether the framing behind the brick section is accessible.
  • What the written quote says about what happens if damage is found behind the old section once work starts.
  • Whether they carry WSIB coverage, and whether the crew's Working at Heights training is current.
Before a contractor arrives, stand back from the wall and note where exactly the brick section ends and the other cladding begins, whether there are any visible gaps or stains near that joint, and whether any interior walls on that side show water marks or staining below windows.
Ottawa Siding Contractors

Want this done at your place?

Tell us about your siding and we'll send it to local Ottawa siding contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa siding contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

Siding IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local siding contractors in Ottawa. Free matching, no obligation.

Find a Siding Contractor